Powerstock glass lined calorifier
Glass lined calorifier for indirect fired hot water storage.
7 models of calorifier with continuous outputs (@44°C ∆T) of 569, 682, 1173, 1460, 1760, 1627, 1858 l/h.
Product information
- Power outputs 29-96kW and storage capacities of 160-958 litres.
- Safe and clean indirect fired domestic hot water generation - want to know the difference between Indirect vs Direct Hot Water Systems?
- Integrates easily with renewable energy sources and heating commercial boilers.
- Long life with corrosion protection from magnesium anodes.
- Flexibility in design of commercial heating and hot water systems.
- Low cost solution with easy installation and no flue requirements.
- Twin coils to connect to two energy sources (on the PS300-PS1000 models) or connect in series for an extended surface area single coil.
- Easy access to plant room as the most Powerstock hot water calorifiers fit through a standard doorway.
- Inspection and clean out door for easy maintenance.
- Full project assistance with hot water sizing and selection of equipment to match the application.
- BIM objects available to assist in design and management.
- Extensive back up and support from our team of experienced engineers across the UK.
- Long term commitment to spare parts
- Available for next day delivery (dependent on stock availability, charges apply, order cut-off 12pm).
Technical data
| Units | PS160 | |
|---|---|---|
| General Data | ||
| ErP class | B | |
| Storage capacity | l | 157 |
| Top coil surface area | m² | N/A |
| Top coil volume | l | N/A |
| Bottom coil surface area | m² | 0.75 |
| Bottom coil volume | l | 4.9 |
| Max operating pressure (primary - coil) | bar | 10 |
| Max operating pressure (secondary - storage) | bar | 10 |
| Max operating temperature (primary - coil) | °C | 110 |
| Max operating temperature (secondary - storage) | °C | 70 |
| Weight empty | kg | 70 |
| Standby losses | kW/24hr | 1.34 |
| Bottom Coil Only | ||
| Continuous output* | l/h | 501 |
| Heat input | kW | 29.2 |
| 10 min peak output* | l | 250 |
| Recovery time | min | 20 |
| Top & Bottom coil connected in series | ||
| Continuous output* | l/h | N/A |
| Heat input | kW | N/A |
| 10 min peak output* | l | N/A |
| Recovery time | min | N/A |
| Electrical | ||
| Destratification pump power supply | 230V 50Hz 1 Phase | |
| Destratification pump power consumption | W | 60 |
| Destratification pump current | A | 0.35 |
| Electric anode power supply | 230V 50Hz 1 Phase | |
| Electric anode power consumption | W | 23 |
| Electric anode current | A | 0.1 |
Downloads
|
Powerstock calorifier and water storage brochureProduct brochures 2695 kb |
Download |
|
|
Powerstock calorifier installation manualInstallers guides 2715 kb |
Download |
|
Powerstock calorifier 160 front viewCAD 13 kb |
Download |
|
|
Powerstock calorifier 160 plan viewCAD 5 kb |
Download |
|
|
Powerstock calorifier 160 side viewCAD 10 kb |
Download |
|
|
Powerstock calorifier 200 front viewCAD 13 kb |
Download |
|
|
Powerstock calorifier 200 plan viewCAD 5 kb |
Download |
|
|
Powerstock calorifier 200 side viewCAD 11 kb |
Download |
|
|
Powerstock calorifier 300 front viewCAD 20 kb |
Download |
|
|
Powerstock calorifier 300 plan viewCAD 6 kb |
Download |
|
|
Powerstock calorifier 300 side viewCAD 17 kb |
Download |
Optional extras
- Unvented water supply kit - essential for any unvented application and includes an expansion vessel sized for the water heater and local pipework only.
- Top to bottom pump recirculation pump kit to prevent stratification and protect against legionella within the water heater.
- Electrical anode protection.
- Electric immersion heater kits with ratings of 4kW or 9kW.
- Choose from a wide range of service contracts to help maintain optimum performance.
- Book commissioning at the same time as placing your order for improved warranty terms.
Often bought with
Case studies
Multi-tenanted office block
Sector: Offices
Project: A calorifier was selected as the ideal product to replace a failed water heater and overcome flue issues on site to get hot water back up and running quickly.
Building: Multi-tenanted office building
Application: Domestic Hot Water (DHW) 500l
Learn more
St Paul's Cathedral, London
Sector: Historic building
Project: The prestigious cathedral on the top of Ludgate Hill benefits from modular boilers and high-performance calorifiers from Hamworthy Heating.
Building: Grade 1 listed refurbishment
Application: Space heating 1,016kW, domestic hot water 1,000L
Learn more
Canford School, Dorset
Sector: Education
Project: A prestigious boarding school in Dorset continued a long-standing relationship to procure its heating and hot water plant from local manufacturer.
Building: Boarding school refurbishment
Application: Space heating, 210kW; indirect fired DHW
Learn more
Nebula Court, London
Sector: Affordable housing
Project: A development in London is setting the trend for renewable energy in community housing, with 63 solar collectors from Hamworthy.
Building: New build residential
Application: Space heating 540kW and domestic hot water
Learn more